Skip to main content
HIGH

CVE-2026-19577

CVSS v3

7.1

HIGH

EPSS Score

—

exploit probability

CISA KEV

No

known exploited

Exploitation

—

SSVC status

Get an alert for each new CVE published for the software you run. Set up CVE Watch Free account · no credit card

Affected and fixed versions

Neither OSV.dev nor the vendor advisories we read list affected versions for CVE-2026-19577 yet.

Full record on NVD

Description

net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor. The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.

Technical details

CVSS v3 Vector
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
Published
2026-10-11
Last Modified
2026-10-11

Frequently asked questions

What is CVE-2026-19577?

net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor. The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.

Is CVE-2026-19577 actively exploited?

Active exploitation of CVE-2026-19577 has not been confirmed.

What is the CVSS score for CVE-2026-19577?

CVE-2026-19577 has a CVSS v3 base score of 7.1 (HIGH severity), with vector string CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H.

Hear about the next vulnerability in your software

CVE Watch matches each new CVE to the vendors and products you list (vendor and product, not the version) and puts it in your alerts with its KEV and EPSS status.

Already have an account? Open CVE Watch

No credit card required · 50 free checks/month · Free API key