Skip to main content
No exploitation reported

CVE-2017-8335

No exploitation reported by the sources we read.

  • Published2019-06-18
  • WeaknessCWE-119

Am I affected?

With a domain, we read the version its public headers and pages expose. A distribution build can carry the fix under an older number.

Description

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function.

Timeline

dates in UTC
  1. 2019-06-1819:15CVE publishedNVD

Versions per branch

NVD
Securifi almond 2015 firmwareversion to verify
BranchAffectedFixed in
—= al-r096no fix published
Securifi almond firmwareversion to verify
BranchAffectedFixed in
—= al-r096no fix published
Securifi almond\+firmwareversion to verify
BranchAffectedFixed in
—= al-r096no fix published

as publishedRanges as NVD and OSV publish them; a distribution’s build can be fixed under an older number.

Fix

No fix published by the sources we read yet. NVD record

Detection

Nuclei template
none so far
ProjectDiscovery
Exploit-DB
no entry
Exploit-DB
Proof of concept
Metasploit modules
none listed
Metasploit Framework

Sources

Identifiers

Technical details

CVSS v3 Vector
CVSS:3.0/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H
Published
2019-06-18
Last Modified
2026-06-17
NVD status
Modified
GitHub Advisory
GHSA-8gcv-7mx7-pfhc

Frequently asked questions

What is CVE-2017-8335?

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function.

Is CVE-2017-8335 actively exploited?

Active exploitation of CVE-2017-8335 has not been confirmed. Its EPSS score was 2.0% on 2026-11-08, the estimated probability of exploitation in the next 30 days.

What is the CVSS score for CVE-2017-8335?

CVE-2017-8335 has a CVSS v3 base score of 8 (HIGH severity), with vector string CVSS:3.0/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H.

Hear about the next vulnerability in your software

Surveillance reads the versions in your stack — a domain, a lockfile or a list — checks each CVE against the ranges its sources publish, and alerts you when one you run is exploited or enters CISA KEV. A version it cannot read stays « version not verified ».

Get alerts for this productCISA KEV additions, November 2026Search CVEs

No credit card required · No monthly cap on website lookups · 250 API requests/month

Go further

Related vulnerabilities

Same product first, then the same vendor advisory and the same publication week.

Back to CVE Database

Sources for this record